A Groundwork company - serving San Francisco, CA
Iron Fence in Half Moon Bay, CA | Groundwork Construction Co. of San Francisco

Iron Fence in Half Moon Bay - Free Quote, Property Line & Permit Handled

We locate the property line, pull the permit, and handle HOA approval before a post goes in. Written price per foot, quoted on site, with no add-ons at the end.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Iron Fence in Half Moon Bay: What It Takes, What It Costs

An iron fence in Half Moon Bay typically runs $3,500 to $9,000, and most residential runs are finished in three to five working days once the material is on site. The job covers layout, post footing, panel setting, gate hanging, and a corrosion-resistant finish. Coastal salt air here is hard on metal, so prep and coating quality matter more than the iron itself. Call (866) 320-2646 to schedule a free on-site estimate.

Call (866) 320-2646

How We Install an Iron Fence, Start to Finish

The sequence below is what a real Half Moon Bay iron fence job looks like day by day. Timelines shift with weather, access, and how much old fence has to come out, but this is the honest shape of it.

  • Stage 1 – Site visit and layout (day 1, 1 to 2 hours). We walk the property line with you, confirm the fence run, gate placement, and post spacing, and check for buried irrigation, utility stub-outs, and grade changes. You decide the style, height, and finish before we order anything. Nothing gets fabricated until that’s locked.
  • Stage 2 – Demo and prep (day 1 to 2). Old fencing, posts, and concrete footings come out, and we haul it away. On a typical coastal lot this is where we find the surprises: a buried drain, a rotting wood post sleeve, or a deck footing that a previous owner poured in the fence line. We flag it before we keep going.
  • Stage 3 – Post footings (day 2). Iron posts go in with concrete footings set below the local frost and grade line, spaced to the panel width you chose. Coastal soil and wind exposure mean the footing depth and post anchoring get more attention here than they would inland. This stage takes a full day on most runs.
  • Stage 4 – Panel and gate set (day 3). We set the panels, hang the gate, and check the swing, latch, and alignment. On longer runs or sloped ground we rack the panels to follow grade rather than stepping them, which looks cleaner and lasts longer.
  • Stage 5 – Finish and final walk (day 3 to 5). Touch-up on the coating, hardware check, and a walkthrough with you. Any permit inspection gets scheduled here. We don’t call the job done until you’ve walked the whole run with us.

What you decide and when: the style, height, and finish on day 1; the gate hardware and any automation during the order; nothing after panels are cut. Iron is not a material you change your mind on mid-job without eating the cost.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The Options You’ll Choose Between

Iron is the goal, but “iron fence” covers a range of products, and the choice you make here drives both the price and how the fence holds up on the coast.

  • Wrought iron (traditional, forged): The heaviest, longest-lived option. Genuine wrought iron takes a finish beautifully and holds up to salt spray better than mild steel, but it’s the top of the range and needs a good coating system. Suits homeowners who want a generational fence.
  • Steel or “ornamental iron” (mild steel): The most common choice, and where most Half Moon Bay jobs land. Lighter than wrought, priced well, and durable when it’s galvanized and powder-coated. This is where coating quality decides whether you get 8 years or 20 out of it.
  • Aluminum that mimics iron: Rust-proof by nature, which matters in a salt-air town, but it dents more easily and the finish can chalk. A reasonable pick if you want the look without the maintenance, though the feel is different under the hand.
  • Finish and coating: Powder-coat over galvanizing is the coastal standard. A basic paint job on steel will rust from the inside out within a few seasons here. Ask what’s under the color.
  • Gates and hardware: Manual swing gates are standard. Automated gates add wiring and a power run, which is a separate scope. Stainless or hot-dip galvanized hinges and latches are worth the upgrade on the coast.

We carry finishes and coatings that match the coastal exposure, and where the fence ties into a James Hardie-clad wall or a home exterior, we can pull a color that reads as intentional rather than bolted on.

What an Iron Fence Costs in Half Moon Bay, CA

Most residential iron fence runs in Half Moon Bay land between $3,500 and $9,000 for the fence itself. That’s the number to plan around. A small side-yard run at the low end, a long perimeter with a gate and a coastal-grade finish at the high end.

What pushes the number up or down:

  • Linear feet and height: A 40-foot run and a 120-foot run are different jobs. Height above 4 feet adds material and footing cost.
  • Material grade: Galvanized and powder-coated steel sits in the middle. True wrought iron pushes toward the top of the range.
  • Site condition: Removal of old concrete footings, rock, or an old wood fence adds labor. Coastal lots often hide surprises here.
  • Gates and automation: A pedestrian gate is included in most estimates. An automated driveway gate is a separate line and a significant step up.
  • Permits and coastal review: If the run needs a permit or falls under coastal review, add time and a permit cost. We tell you upfront whether it does.

A written estimate includes material, labor, footings, standard hardware, and haul-away. It usually does not include landscaping restoration, irrigation relocation, or electrical for an automated gate unless we scope it. The number you see is the number you pay.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Half Moon Bay Homes Do to This Job

Half Moon Bay sits in a coastal fog belt, and that changes iron fence work in ways you won’t see in San Bruno or Daly City. Salt-laden marine air and constant damp attack fasteners, hinges, and any cut edge in a coating. A steel fence that would last two decades inland can rust from the welds in half that time if the coating wasn’t done right for the coast. We spec galvanized or hot-dip hardware and a powder-coat system that stands up to the salt, because that’s what this town demands.

The housing stock matters too. The mix of older coastal homes, 1960s and 70s ranch and tract houses around Ocean Colony and Alsace Lorraine, and newer custom builds means the fence line often runs against wood siding, wood-framed decks, and cantilevered balconies exposed to marine air. When we set a new iron fence in one of those yards, we’re often fixing the rot and corrosion that the old fence hid. Coastal permit review and fire hazard severity zoning add time and scrutiny to even modest projects, so we check the permit path before we order material rather than after.

Our technicians have up to 12 years of experience, and this is the kind of work where that shows: reading a coastal lot, knowing where the salt hits hardest, and specifying hardware that won’t be back next spring.

If the iron fence is one piece of a bigger exterior plan, it’s often paired with a full Fence Installation in Half Moon Bay project, and homeowners often pair this with Patios, Walkways & Pool Decks in Half Moon Bay to tie the yard together. When an accessory dwelling is part of the plan, we see it run alongside ADU Design & Permitting in Half Moon Bay. For the broader scope, our Fence Installation service covers the full range, and we work all of Half Moon Bay from the coast to the hills.

Serving Half Moon Bay, CA – Our Local Coverage Area

We serve Half Moon Bay and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked – Iron Fence in Half Moon Bay

Get a Free Iron Fence Estimate in Half Moon Bay

A free on-site estimate starts with a walk of your property line and a look at the old fence, grade, and access. You’ll get a written, line-item quote with material, labor, and the coastal-grade finish spelled out, plus a clear answer on permits. No surprises, no change orders. Call (866) 320-2646 to schedule your free estimate. A live person answers, 24/7.

Written by the team at Groundwork Construction Co.

Why Half Moon Bay Chooses Groundwork Construction Co. of San Francisco

We set the standard for iron fence in Half Moon Bay.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Half Moon Bay

Getting your iron fence project started is simple.

1

Call or Request a Free Estimate

Tell us about your iron fence project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local iron fence pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Half Moon Bay Customers Say

Trusted by homeowners across Half Moon Bay and surrounding areas.

★★★★★

"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."

Marco Castillo
★★★★★

"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."

Angela Wong
★★★★★

"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."

Robert Sullivan

Ready for Iron Fence in Half Moon Bay?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Half Moon Bay.

(866) 320-2646

Request a Free Estimate in Half Moon Bay

Tell us about your iron fence needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - 24/7 Dispatch