Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Metal Roofing in Half Moon Bay, CA: What It Involves and What It Costs
Metal roofing in Half Moon Bay typically runs $15,000 to $40,000 for a full installation, and most homes are finished in two to four weeks once materials land on site. The job means tearing off the old roof, inspecting and repairing the deck, then installing a corrosion-rated metal system with coastal-grade fasteners and flashing. Salt air changes every material decision here. Call (866) 320-2646 and we’ll walk your roof and put a real number in writing.
How a Metal Roof Goes On, Stage by Stage
Every metal roof we install in Half Moon Bay follows the same sequence, and knowing the stages helps you plan around the noise, the dumpster, and the days your driveway is blocked.
Stage 1: Tear-off and deck inspection (1 to 3 days). We strip the old shingles or shakes down to the sheathing. On coastal homes this is where the surprises live: soft plywood, rusted-through nails, and fascia that’s been holding water for years. You decide right here whether we replace the decking and how far the repair runs. We photograph everything before it gets covered.
Stage 2: Underlayment and ice-and-water membrane (1 day). A high-temp synthetic underlayment goes down, plus a peel-and-stick membrane in the valleys and along the eaves. In a fog belt the goal is keeping wind-driven moisture from ever touching the deck, so this layer matters more here than it does inland.
Stage 3: Flashing and trim (1 to 2 days). We set the eave trim, gable trim, valley metal, and pipe boots. All fasteners are corrosion-rated stainless or coated, never plain galvanized. You choose the trim color here, because it frames the whole roof.
Stage 4: Panel installation (3 to 6 days). Panels go on in runs, screwed with the manufacturer’s specified pattern to the wind-uplift rating. Every penetration gets sealed with a proper boot or collar, not a smear of caulk. This is the stage where a crew’s habits show, so we keep it slow and correct.
Stage 5: Ridge, vents, and final walk (1 day). Ridge cap, venting, and the final inspection happen together. We pull the permit and meet the inspector, then walk the roof with you and hand over the paperwork. You’ll know exactly what warranty covers what before we leave.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Material Choices You’ll Actually Make
Metal roofing isn’t one product. The decisions below are the ones that move both your price and your long-term outcome on the coast.
- Panel style: exposed fastener vs. standing seam. Exposed-fastener panels are the value option and go down faster. Standing seam hides the fasteners and handles expansion and coastal corrosion better, but costs more up front. In a salt-air town, the hidden-fastener system usually wins on longevity.
- Base metal: steel vs. aluminum. Painted steel with a quality coating is the workhorse. Aluminum costs more but shrugs off salt spray without rusting. For homes a few blocks off the water, aluminum is worth the premium.
- Finish and coating. A premium paint system with a strong warranty against chalking and fading holds its color through years of fog and UV. Cheaper coatings fade and peel early on a west-facing slope.
- Profile and color. Narrow profiles read cleaner on older ranch homes; wider profiles suit custom builds. Light colors keep the attic cooler, though that’s less of a factor here than inland.
- Ventilation upgrades. Ridge venting and intake improvements keep attic moisture in check, which matters when the marine layer parks over the house for weeks.
The trade-offs are honest: the cheapest system saves you now and costs you later in coastal conditions, and the premium system costs more but is built to last with a finish warranty behind it.
What Metal Roofing Costs in Half Moon Bay, CA
For a typical Half Moon Bay home, metal roof installation runs $15,000 to $40,000. Where your job lands depends on a handful of variables, and we put every one of them in the written estimate up front.
- Roof size and pitch. A simple gable costs less per square than a cut-up roof with multiple hips, valleys, and dormers.
- Deck condition. Rotten sheathing and fascia found at tear-off add real dollars. We inspect the roof deck after stripping it and price the repair in writing before we proceed, never as a surprise change order.
- Metal and panel choice. Aluminum standing seam sits at the top; painted steel exposed-fastener panels sit at the bottom.
- Flashing complexity. Chimneys, skylights, and multiple roof planes mean more custom flashing. Skylight replacement is usually the right call while the roof is open.
- Permit scope. A straightforward re-roof permit moves faster than a job that triggers coastal review or structural repair. We pull the permit and handle the inspection either way.
A written estimate should list tear-off, disposal, underlayment, flashing, panels, fasteners, labor, and the permit. It should also tell you what the price does not cover, usually structural repair and any change to ventilation. Our technicians have up to 12 years of experience, and you’ll see the same numbers we quote. Financing at 0% for 18 months is available, plus $1,000 off projects over $10,000, so a metal roof can go on without draining savings.
See the difference
Before
After
Before
After
Before
AfterWhat Half Moon Bay Homes Do to This Job
Half Moon Bay sits in a coastal fog belt where salt-laden marine air, persistent damp, and coastal building rules shape every roof. That’s not marketing language. It’s why the fasteners, flashing, and membrane we use here differ from what we’d spec in a sun-drenched inland town. The Coastal Commission and coastal zoning overlay can add review time to a re-roof, flood zones and fire hazard severity zones in 94019 carry their own requirements, and budgets should expect some of that review time.
The housing stock tells the story too. Older single-family coastal homes, 1960s and 70s ranch houses around Ocean Colony and Alsace Lorraine, and newer custom builds most often have wood siding and wood-framed structures exposed directly to marine air. That means when we tear off a roof, we’re frequently finding corroded original fasteners, stained sheathing, and fascia that’s been wet for longer than anyone realized. Salt spray accelerates the corrosion of every piece of metal on the roof, and the fog keeps surfaces wet long enough for mold to get a start, so we lean hard on corrosion-resistant hardware, proper drainage, and moisture barriers. The same marine exposure that rots wood decks and rail posts from the top down works on your roof’s edges first. It’s a routine repair here, not an occasional one.
Serving Half Moon Bay, CA – Our Local Coverage Area
We serve Half Moon Bay and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Metal Roofing in Half Moon Bay
Most jobs take two to four weeks from tear-off to final walk, with coastal permit review sometimes adding days before we start. Weather can push a day or two, and we won’t install in high wind. Call (866) 320-2646 for a schedule based on your roof.
Yes, a re-roof permit is required, and coastal overlay rules may add review. Half Moon Bay’s coastal zoning and flood-zone requirements can extend the timeline, so we pull the permit and handle the inspection on your behalf as part of the job. Call (866) 320-2646 and we’ll explain what your address triggers.
In most cases, yes. A metal roof goes on over your existing framing unless inspection reveals structural damage, and moving plumbing or structure is only needed when something failed underneath. If we find damage at tear-off, we price the fix in writing before touching it. Call (866) 320-2646 for a free on-site estimate.
Expect $15,000 to $40,000, driven by roof size, deck condition, panel style, and flashing complexity. Each line item is in the written estimate, and the number you see is the number you pay. Call (866) 320-2646 for an exact quote, free.
The manufacturer covers the panels and finish, and our work is backed by the 730-Day Done Right Promise, so if it’s not done right, we make it right. Metal systems here are rated for decades. Call (866) 320-2646 and we’ll spell out exactly what’s covered.
Get a Free Estimate for Metal Roofing in Half Moon Bay
Call (866) 320-2646 and a live person answers day or night. We’ll schedule a walk of your roof in Half Moon Bay, check the deck and flashing, and hand you a written, line-item estimate for metal roofing with no surprises. That’s the best place to start, and it’s free. While you’re at it, we can talk through how the roof ties into the rest of the envelope, including our Roofing service and how Window Replacement in Half Moon Bay or Impact Windows & Doors in Half Moon Bay often pair with it. It’s part of a full Roofing in Half Moon Bay scope, and you can see everything we do across Half Moon Bay. Call today.
Written by the team at Groundwork Construction Co.