Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sliding & Patio Doors in San Bruno: What the Job Actually Takes
A sliding or patio door replacement in San Bruno typically runs $3,200 to $11,500 installed, with most single-door swaps landing near $4,500 to $7,000. The work itself takes one to three days once materials are on site; the order-and-approval window before that usually runs two to five weeks. Call (866) 320-2646 to set up a free on-site estimate and get a written line-item number for your opening.
How We Install Sliding & Patio Doors, Stage by Stage
Every opening is different, but the sequence rarely changes. Here’s what you can expect, and where your decisions land.
Stage 1: Measure and scope (day 1, about 90 minutes)
We check the rough opening, the header, the sill, and the track. On a San Bruno home from the 1940s or 1950s, the framing behind the trim is often the surprise – a fog-belt house that’s seen fifty winters of marine moisture usually has some soft sheathing at the sill. We measure the clear opening, confirm the swing or slide direction, and photograph the wall cavity so the quote matches what’s actually there. You decide the door style and the glass package at this visit, not later.
Stage 2: Order and permit (week 1 to week 3)
Most sliding and patio door swaps need a permit when the opening size changes or the header is altered. We pull it and schedule the inspection. Lead times run two to five weeks depending on the brand and glass type – impact-rated and custom-width units sit at the long end. You’ll sign off on the final spec sheet here, so there’s no guessing what’s arriving on the truck.
Stage 3: Demo and prep (day 1 of install, three to four hours)
We pull the old door, the trim, and any damaged sill material. Then we check for rot in the sheathing and the framing – the single most common hidden cost in San Bruno. If it’s sound, we move on. If it isn’t, we show you before we replace it and quote it on the spot.
Stage 4: Set, flash, and seal (day 1 to day 2, four to six hours)
The new unit goes in plumb and level, then the flashing and weather barrier go on. On this coast, the flashing detail is the whole ballgame. Cool damp summers and steady onshore wind push moisture into any gap you leave, so we build the water-shedding layer the way the manufacturer specifies, not the way’s fastest. You’ll see the door operate before the trim goes back on.
Stage 5: Trim, hardware, and walkthrough (day 2 to day 3, two to four hours)
Interior and exterior trim go back, the screen and hardware get installed, and we test the slide, the lock, and the weep holes. Then we walk it with you, show you how the door drains, and hand over the warranty paperwork.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Sliding & Patio Door Options You’ll Choose Between
- Vinyl sliding doors ($3,200 to $6,500 installed): The value play. Low maintenance, no repainting, good thermal numbers. They don’t take paint and the frames can look bulky on a wide opening.
- Fiberglass and composite ($5,500 to $9,000): Holds up to moisture better than wood and looks more like a real painted door up close. The honest trade-off is cost and a shorter list of finish options.
- Wood-clad and aluminum-clad ($7,500 to $11,500): A wood interior with a weather-resistant exterior shell. Andersen and Marvin units sit here. Best look, highest price, and the exterior finish still needs occasional attention.
- Multi-panel and folding configurations: A two-, three-, or four-panel slider opens up a patio wall beautifully. Every extra panel adds cost, and the structural header needs to carry the span.
- Glass package: Standard dual-pane is fine for most San Bruno rooms. Low-E and laminated glass add $400 to $1,200 but pay it back in comfort on a west-facing wall that takes the afternoon wind and fog.
The framing brand matters less than the install. We work with established names like Andersen and Pella because they stand behind the units and the parts are available years down the road.
What Sliding & Patio Doors Cost in San Bruno, CA
Plan on $3,200 to $11,500 for a sliding or patio door replacement in San Bruno, with the middle of that range covering most standard single-door swaps. Five things push a job toward the low end or the high end:
- Opening size: A standard 6-foot slider sits near the bottom of the range. A 12-foot multi-panel system can double it.
- Existing condition: Soft sheathing, a rotted sill, or a settling header adds $300 to $1,500 in repair before the new door goes in.
- Structural changes: Widening an opening means a new header, framing, drywall, and often a permit revision. That’s where a $3,500 job becomes an $8,000 one.
- Material grade: Vinyl at one end, clad wood at the other, with a $4,000 to $5,000 spread between them.
- Permit scope: A like-for-like swap is simpler than a size change. The size change triggers plan review and inspection time.
Your written estimate covers the unit, demo, framing repair up to the amount we’ve scoped, flashing, sealing, trim, hardware, permit, and cleanup. It doesn’t cover rot we can’t see until the wall is open – but we quote that in writing before we fix it. Upfront pricing, no surprises. Financing at 0% for 18 months is available, and projects over $10,000 get $1,000 off.
See the difference
Before
After
Before
After
Before
AfterWhat San Bruno Homes Specifically Do to This Job
San Bruno’s housing stock is the whole story here. The Crestmoor neighborhood and the blocks around it are dominated by post-WWII single-family homes, many built in the 1940s and 1950s. The 2010 PG&E gas pipeline explosion in Crestmoor triggered a mandatory seismic retrofit and rebuilding wave, and that still shapes permits and inspections across the city today. What you get is a mix – newer seismic-compliant structures next to older homes still needing foundation bolting, shear walling, and chimney bracing – and that mix changes how a patio door job runs. On a rebuilt Crestmoor house, the openings are often newer and the framing is sound. On an original 1950s home a few streets over, we routinely find soft sheathing and a sill that’s given up after decades of fog-belt moisture. The marine layer rolls in off the Pacific most summer days and the onshore wind never really stops, so flashing and weather-resistant detailing aren’t optional here. If your work touches the exterior wall or involves digging near the Crestmoor blast zone, PG&E gas line clearance procedures can add time to the schedule, and we build that into the plan up front. This is part of a Windows & Doors in San Bruno scope when you’re doing more than one opening, and homeowners often pair a patio door upgrade with Fence Repair in San Bruno or a Paver Driveways in San Bruno project to finish the yard at the same time.
Serving San Bruno, CA – Our Local Coverage Area
We serve San Bruno and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Sliding & Patio Doors in San Bruno
A single door install takes one to three days on site once the unit arrives, and the order-and-permit window before that runs two to five weeks. Wider multi-panel systems can stretch the install to four days. Call (866) 320-2646 for a timeline specific to your opening.
A like-for-like swap in the same opening often doesn’t need one, but any change to the opening size or the header does. We pull the permit and schedule the inspection, and we’ll tell you at the estimate which category your job falls into. Call for a free scoping visit.
Yes, in most cases. If the new door fits the existing opening, there’s no plumbing or structural work – it’s a straight swap. Widening the opening is a different job with a new header and framing. We’ll show you both options and the price for each.
Expect $3,200 to $11,500 installed, with most standard single-door swaps between $4,500 and $7,000. Size, existing rot, structural changes, and material grade move the number. Call (866) 320-2646 for an exact written quote – estimates are free.
Our work is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right. The door manufacturer’s warranty covers the unit itself and runs longer, typically on the glass and frame. You’ll get both sets of paperwork at the walkthrough.
Get a Free Sliding & Patio Doors Estimate in San Bruno
Call (866) 320-2646 to schedule a free on-site estimate for Sliding & Patio Doors in San Bruno. We measure the opening, check the framing, and give you a written line-item quote with the door and the labor separated out. A live person answers around the clock, and your technician arrives in uniform. This work also falls under our broader Windows & Doors service, and we cover every corner of San Bruno.
Written by the team at Groundwork Construction Co.