Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tile Roofing in San Francisco, CA: what it takes and what it costs
Tile roof repair in San Francisco runs $710 – $2,950; a full tile roof replacement in the city typically lands somewhere in the $9,440 – $23,600 range once you account for tear-off and the structural realities of an older San Francisco roof. On tile, most jobs we see are repair and re-flash work rather than full replacement. Call (866) 320-2646 and we’ll walk your roof, check the underlayment and flashings, and give you a written line-item estimate before anything gets ordered.
How a tile roofing job actually runs, day by day
Tile is unforgiving. The tile itself often outlives the waterproofing under it, so the sequence matters as much as the material. Here’s the real order of operations on a San Francisco tile roofing project.
1. Roof inspection and moisture mapping (day 1). We get on the roof, photograph every field, valley and penetration, and check the underlayment by feel and by probing. On a 1920s Edwardian wood-frame row house in Noe Valley, that often means popping a handful of tiles to look at what’s underneath. You decide at this stage whether this is a repair or a replacement.
2. Written scope and structural check (days 1 – 2). We measure the deck, look for sag, and check rafter spacing. Tile is heavy, and a roof built for composition shingles may need reinforcement before it carries clay. You get a line-item estimate with the structural work separated out, so you know exactly what’s structural and what’s roofing.
3. Tear-off and deck prep (2 – 4 days for a typical row-house roof). Existing tile comes off, then the old underlayment. Decking gets inspected, rotten sheathing gets replaced, and the whole surface is dried in. If your home is part of a full Roofing in San Francisco scope with structural changes, this is the stage where the two trades meet.
4. Underlayment, flashing and tile setting (4 – 8 days). This is the part that keeps your roof dry for the next 40 years. We install the underlayment system, then flashings at chimneys, vents and valleys, then set the tile. On the fog-exposed west side, we spec stainless fasteners and galvanized flashing as standard. Your decision here is tile type and color.
5. Final inspection and cleanup (day 1). We check the whole field for cracked or lipped tile, confirm drainage, and haul out debris. You get a walkthrough and the paperwork for the 730-Day Done Right Promise.
Total calendar time is usually one to three weeks. The fog and damp don’t stop work in San Francisco, but they do mean every dry-in stage has to be weather-tight before we leave for the day. Our technicians have up to 12 years of experience on tile systems, and that matters more here than on most roofing jobs.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The tile options you’ll choose between
Clay versus concrete, profile, color, and underlayment grade are the four decisions that shape both the look and the price. Here’s the honest trade-off on each.
- Clay tile. The traditional choice for San Francisco’s older stock. Lasts the longest, holds color, and fits the 1906-era rebuild aesthetic. Heavier and more expensive per square, and fragile during install. If you’re repairing an existing clay roof, matching profile and color is the main constraint.
- Concrete tile. Cheaper than clay, available in dozens of profiles and colors, and strong enough to handle the marine fog well. It’s a solid middle path when you don’t need a historic match. Slightly heavier in some profiles.
- Low-profile vs. high-profile tile. High-profile barrel and S-tile reads dramatically on a Victorian row house but costs more in labor and flashing detail. Low-profile tile suits more contemporary builds and is easier on tight lots.
- Underlayment system. The single most important spec. A premium underlayment and proper flashing is what actually keeps water out; the tile is the shield. Skipping on underlayment to save on the visible tile is the most common mistake we see.
For sheds, dormers and exposed trim around a tile roof, James Hardie siding holds up in the fog belt better than standard wood. Homeowners often pair tile work with Energy-Efficient Windows in San Francisco when they’re upgrading the envelope at the same time.
What Tile Roofing costs in San Francisco, CA
Here’s the price band we quote against, with the variables that move you toward one end or the other.
- Tile Roof Repair: $710 – $2,950
- Full Roof Replacement (tile included): $9,440 – $23,600
What pushes a job toward the top of that range:
- Roof size and pitch. A 1,200 sq ft roof is one number; a steep-pitched Victorian with multiple valleys and dormers is another. Pitch adds labor and fall-protection time.
- Deck condition. Rotten sheathing, sagging rafters or a need to reinforce for tile weight add structural cost. This is common on 1880s – 1920s wood-frame stock.
- Underlayment and flashing grade. A premium underlayment and stainless/galvanized flashing at every penetration push cost up but add decades of life in the fog belt.
- Access and staging. Tight San Francisco lots, alley access, and street parking restrictions can add labor hours. So does any tile that has to be hoisted instead of stacked.
- Permit scope. Repairs often need a permit; a full replacement always does. Your estimate separates permit costs so you know what’s going to the city.
A written estimate from us lists tear-off, decking, underlayment, tile, flashing, fasteners, permit and haul-away as separate lines. What it won’t include unless we flag it: structural reinforcement, and any surprises we find under the tile after tear-off (we photograph those and quote them before proceeding). Upfront pricing, no surprises.
See the difference
Before
After
Before
After
Before
AfterWhat San Francisco homes specifically do to a tile job
San Francisco is one of the densest, oldest urban cores in the country, built on and beside steep hills. That combination changes tile roofing in ways it doesn’t elsewhere. A 1906-era Edwardian row house in the Mission or Bernal Heights was framed for its era, and its deck may not carry the weight of heavier clay without reinforcement. On the west-side hills, from the Sunset out toward the ocean, the fog belt and salt air eat standard fasteners and paint within a fraction of the normal lifespan, which is why we spec stainless hardware and galvanized flashing even on small repair jobs. Higher up in Twin Peaks or along the hillside blocks off Portola, steep lots mean staging and access get tight. And every project runs through San Francisco’s discretionary planning gauntlet, which can add a year or more before a shovel hits dirt on anything beyond a straight repair. If your home is also a soft-story retrofit candidate, that has to be sequenced with the roof scope. When the project grows beyond the tile, our Roofing service and our San Francisco service-area team coordinate the whole thing. Homeowners upgrading the exterior at the same time often pair this with Impact Windows & Doors in San Francisco.
Serving San Francisco, CA – Our Local Coverage Area
We serve San Francisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Tile Roofing in San Francisco
A repair is typically a single day. A full tile roof replacement on a typical San Francisco row house takes one to three weeks, split across tear-off, deck prep, underlayment and flashing, and tile setting, with the dry-in protected each night. Call (866) 320-2646 for a timeline on your specific roof.
Yes. A full replacement always requires a permit, and even repairs often do. We pull permits and pass inspections as part of the job, and your estimate itemizes the permit cost so there are no surprises after the fact. Call (866) 320-2646 to confirm scope for your address.
Usually. Most tile replacements leave plumbing, electrical and structure in place; the underlayment and flashing work happens over the existing deck. If we find rotten sheathing or sag that needs structural repair, we photograph it and quote it before proceeding. Call (866) 320-2646 to schedule an inspection.
Repairs run $710 – $2,950; a full replacement runs $9,440 – $23,600 depending on roof size, pitch, deck condition, underlayment grade and access. Call (866) 320-2646 for an exact quote; estimates are free.
Every project is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That’s in writing, not fine print. Call (866) 320-2646 and we’ll walk you through the coverage on your estimate.
Get a free tile roofing estimate in San Francisco
Call (866) 320-2646 to schedule a free on-site estimate for Tile Roofing in San Francisco. A live person answers around the clock, and we’ll set a visit that works with your access and parking. On the walk-through we photograph your roof, check deck and underlayment, and hand you a written line-item estimate with structural work and permit costs spelled out. Built to last, backed in writing. No pressure on the call, just the number and the plan.
Written by the team at Groundwork Construction Co.