Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Daly City, CA: What It Takes
Walk-In Showers & Shower Remodeling in Daly City typically runs $9,000 – $28,000, with most curbless or low-threshold walk-in conversions landing in the $4,500 – $12,000 range for the shower itself and the rest driven by waterproofing, tile, glass, and any plumbing moved. A straightforward swap takes 5 – 8 working days on site; a layout change with relocated drains and new framing stretches to 2 – 4 weeks. Call (866) 320-2646 for a free on-site estimate.
How the work actually unfolds, day by day
Shower remodels go wrong in the hidden layers, so we sequence the job to catch problems before tile hides them. Here’s the real arc of a walk-in shower project in Daly City, and where you make decisions.
Stage 1: Demo and inspection (days 1 – 2). We pull the old pan, tile, and backer down to the studs. This is the honest moment. On post-war stucco homes, we regularly find rotted framing or failing greenboard behind a shower that looked fine from the hallway. We photograph everything and walk you through what’s behind the wall. You decide then whether to add rot repair to the scope or pause.
Stage 2: Rough-in and framing (days 2 – 4). If the drain is moving, or a bench or curbless entry is part of the plan, the plumber and framer work here. A linear drain repositioned to one wall means cutting and reflecting the subfloor. You choose the drain style now, not later, because the floor slope follows it. If you want a niche, a grab bar backing, or a valve moved for reach, this is the only window to set the blocking.
Stage 3: Waterproofing (day 4 – 5). This is the stage homeowners can’t see and shouldn’t skip. We build a sloped mortar bed or a foam pan, then apply a bonded waterproof membrane across the floor and walls, with banding at every seam and corner. Curbless showers need the whole bathroom floor waterproofed too. We flood-test the pan for a full 24 hours before anything else touches it.
Stage 4: Tile and glass (days 5 – 8). Tile goes up, grout cures, then the glass template is measured. Frameless panels are cut and tempered off site, which usually adds a week’s lead time. You pick the glass thickness and hardware finish at this point. We set the final glass last so it isn’t scratched or knocked during tile work.
Stage 5: Final fixtures and walkthrough (day 8+). Showerhead, valve trim, drain cover, and any bench or seat go in. We run the water, check slope and drainage, and walk you through cleaning and care. The full project is covered by our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices you’ll weigh before we start
Almost every decision on a walk-in shower is a trade-off between cost, maintenance, and how it feels underfoot. Here’s the honest version of each.
- Tile vs. solid-surface walls. Porcelain or ceramic tile gives you the widest design range and holds up well if the waterproofing is right. Large-format slabs cost more per square foot but mean fewer grout lines to scrub. Solid-surface panels cost less installed and are easier to clean, but they look like panels. You’re trading realism for upkeep.
- Curbless vs. low-threshold entry. A true curbless shower is the accessible option and the premium one: it needs a recessed subfloor or a sloped pan, which adds framing and waterproofing labor. A low-threshold curb (1 – 2 inches) gets you most of the way for less money and far less structural work.
- Frameless vs. framed glass. Frameless 3/8-inch tempered glass looks cleanest and costs more; semi-frameless and framed enclosures save money and still do the job. We can spec Mr-Glass or ViewLux for the panel work.
- Linear vs. center drain. A linear drain lets you use a single large-format floor tile and slopes one direction, which reads more upscale. A center drain is simpler and cheaper, but you’ll be cutting the floor tile into quarters around it.
- Bench, niche, and grab bars. A built-in bench adds framing and tile cost; a freestanding teak bench costs less and moves. Grab bar backing is nearly free if we install it during framing and expensive to add later.
- Ventilation. If the bathroom doesn’t already have a properly sized exhaust fan vented outside, we’ll typically add one. In a fog-belt house, trapping moisture in a shower is how you grow mold.
What Walk-In Showers & Shower Remodeling costs in Daly City, CA
Walk-in shower work in Daly City runs $4,500 – $12,000 for a standard size shower, and a broader remodel that includes the surrounding bathroom floor, vanity, and fixtures lands at $9,000 – $28,000. Here’s roughly how the pieces split:
- Shower replacement (same footprint): $3,000 – $8,500
- Tub-to-shower conversion: $3,500 – $10,000
- Walk-in shower installation, custom: $4,500 – $12,000
- Full bathroom remodel with the shower as the centerpiece: $9,000 – $28,000
Four things push a job from the low end to the high end. First, size: a 36×48 alcove is the cheapest footprint; a 60-inch custom with a bench is not. Second, existing condition: rot repair, failing subfloor, or old galvanized drain lines all cost extra to fix, and in Daly City’s older stock they come up more often than not. Third, plumbing and electrical moves: relocating a drain or adding a light and fan circuit means permits and trade labor. Fourth, material grade: a porcelain tile shower and a slab-marble shower with frameless glass and brass trim are not the same job.
Our written estimates are itemized and upfront, so the number you see is the number you pay unless you add scope. Permits, waterproofing materials, and standard fixtures are included. Things that typically aren’t: structural framing changes found after demo, glass lead times outside standard size, and optional upgrades like heated floors.
See the difference
Before
After
Before
After
Before
AfterWhat Daly City homes specifically add to this job
Daly City’s dense slopes of post-war stucco-over-wood-frame homes were built fast in the 1940s through 1960s, and the fog belt has been working on them ever since. Wind-driven rain and cool damp air push moisture into walls and under siding here far more aggressively than in the sunnier suburbs south of the county line. In a bathroom, that shows up as failing waterproofing behind tile, soft framing, and rusted drains. On the steep streets off Mission and around Westlake, we routinely open a shower wall and find original framing that’s been quietly wet for years, and hillside lots often carry older work that was never permitted. We handle the permit pull and inspection scheduling as part of the job, and where we uncover work that needs to be brought up to current code before we close the walls, we’ll tell you before we cover it.
If a full bathroom overhaul is the better call for the house, the shower is usually the centerpiece of Bathroom Remodeling in Daly City, and homeowners remodeling a wet area often pair it with Roof Replacement & Installation in Daly City to fix the water intrusion from above. We work Daly City and the neighboring communities, and our Bathroom Remodeling service covers everything downstream of the shower itself.
Serving Daly City, CA – Our Local Coverage Area
We serve Daly City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked about Walk-In Showers & Shower Remodeling in Daly City
A same-footprint shower replacement takes about 5 – 8 working days on site. A full walk-in conversion with relocated plumbing or a curbless pan runs 2 – 4 weeks, plus glass lead time. Call (866) 320-2646 for a schedule based on your actual bathroom.
Yes, if you’re moving plumbing, changing the drain location, or adding electrical. A tile-and-weatherproofing refresh over the same layout often qualifies as cosmetic and can skip the permit, and we’ll tell you which applies before we start. We pull the permits and schedule inspections so the work is signed off correctly.
Yes. A same-footprint remodel keeps the existing drain and valve, which is the lowest-cost and lowest-disruption path. We still waterproof properly and choose materials that fit the space. If you want a curbless entry or a bigger shower, expect some structural and drain work.
A standard walk-in shower runs $4,500 – $12,000, and a full shower-centered bathroom remodel runs $9,000 – $28,000. Layout changes, material grade, and any rot or framing repairs move the number most. Call (866) 320-2646 for an exact quote, and estimates are free.
Every shower we build is covered by our 730-Day Done Right Promise. If something isn’t right, we make it right. Our technicians have up to 12 years of experience, and the waterproofing, tile, and fixture work are all backed by that written guarantee.
Ready to price your shower?
Call (866) 320-2646 to set up a free on-site estimate for Walk-In Showers & Shower Remodeling in Daly City. On the call we’ll ask about your bathroom’s layout and what you’re trying to change, then schedule a time for us to measure, look behind the existing walls where we can, and hand you a written itemized quote. No pressure, no surprises. Background-checked, uniformed technicians, and live people answering the phone around the clock.
Written by the team at Groundwork Construction Co.