Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Half Moon Bay, CA: What It Takes and What It Costs
A walk-in shower remodel in Half Moon Bay runs $4,500 – $12,000 for the shower itself, and a full Walk-In Showers & Shower Remodeling project – new shower, waterproofing, tile, glass, and often the vanity and floor around it – lands between $9,000 and $28,000. Most jobs take 2 – 4 weeks of working time once materials are on site. Coastal permitting can add a few weeks before that. Call (866) 320-2646 to schedule a free on-site estimate.
How We Run a Shower Remodel, Stage by Stage
Every walk-in shower job follows the same broad sequence. The details change; the order doesn’t. Here’s what actually happens between the first walkthrough and the final cleaning.
Stage 1: On-site measure and design decisions (1 visit, about 90 minutes)
We measure the shower footprint, check the drain location and the depth of the drain plumbing below the subfloor, and look at what’s behind the existing wall. This is where you pick the shower size, the curb or curbless layout, the tile, and the glass. Bring questions about your daily routine: do you want a bench, a niche, a handheld on a slide bar? Those choices affect the framing and the blocking we install, so they need to happen before demolition, not after.
Stage 2: Permits and material ordering (1 – 4 weeks, mostly waiting)
We pull the permit where one is required and place the material order. Tile, glass, and fixtures have lead times. Specialty glass can run 2 – 3 weeks on its own. You’ll get a written line-item estimate with the schedule attached so you know which week is which.
Stage 3: Demolition and inspection of what’s underneath (1 – 2 days)
Out comes the old shower, tile, and backer. This is the day we find out what the last remodel hid. In Half Moon Bay’s older homes, that’s often rotten framing or a failed pan liner. If we find rot, we stop, show you photos, and quote the repair before proceeding. No surprise change orders later.
Stage 4: Rough-in, waterproofing, and tile (7 – 10 working days)
We move the drain if the layout calls for it, set the valve, install cement backer board, and apply a bonded waterproofing membrane over the entire wet area – walls, floor, and curb. Then tile goes up. Waterproofing is the part nobody sees and the part that determines whether your shower lasts 30 years or 8. We don’t rush it.
Stage 5: Glass, fixtures, and final walkthrough (2 – 3 days)
Glass gets templated, fabricated, and installed. Fixtures go in. We test the drain, check the slope, and walk the job with you. Every project carries the 730-Day Done Right Promise – if it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make
The shower you end up with is the sum of a handful of decisions. Here’s the honest trade-off on each.
- Curbless vs. curbed: Curbless showers look cleaner and are safer to step into, but they require recessing the floor or building up the surrounding floor, which adds framing and labor. Budget $1,500 – $3,000 more than a curbed version. A low curb is the practical middle ground.
- Tile material: Porcelain is the workhorse – dense, low absorption, less than $5 – $12 per square foot. Natural stone (marble, travertine) runs $10 – $30 per square foot installed and needs sealing in a wet environment. Large-format tile means fewer grout lines and less to scrub.
- Waterproofing system: A bonded sheet or liquid-applied membrane over cement board is the standard. We don’t skip it and we don’t substitute greenboard. This is the single biggest driver of long-term performance.
- Glass: Frameless glass in 3/8-inch or 1/2-inch thickness runs $1,200 – $4,000 installed depending on configuration. A framed slider costs less but shows its age faster.
- Fixtures: Grohe and Sterling both make reliable valve and trim packages in the mid range. The valve behind the wall matters more than the handle in front of it – don’t cheap out on the rough-in.
- Ventilation: A properly sized exhaust fan is not optional in a coastal house. We size it to the room and duct it outside, not into the attic.
What Walk-In Showers & Shower Remodeling Costs in Half Moon Bay, CA
Here’s the range, broken down by scope:
| Scope | Typical range |
|---|---|
| Shower replacement, same footprint | $3,000 – $8,500 |
| Walk-in shower installation | $4,500 – $12,000 |
| Full Walk-In Showers & Shower Remodeling (shower plus surrounding bath) | $9,000 – $28,000 |
Five things push a Half Moon Bay shower job toward the high end:
- Size and configuration. A standard 36×60 alcove is the baseline. A 5-foot-by-6-foot custom walk-in with a bench and a niche adds framing, tile, and glass area.
- What’s behind the wall. Failed pan liners, rotten studs, and old galvanized supply lines are common in coastal homes. Repair work adds $500 – $3,000 depending on scope.
- Relocating the drain or valve. Moving plumbing means cutting into the subfloor and re-running lines. Each move adds $400 – $1,500.
- Material grade. Porcelain and mid-range fixtures keep the number down. Marble, frameless 1/2-inch glass, and premium trim push it up.
- Permit scope. A like-for-like shower replacement often doesn’t require a permit. Structural changes, drain relocation, or electrical work do, and that adds inspection time and cost.
Your written estimate itemizes demolition, rough-in, waterproofing, tile, glass, fixtures, and permit fees. It does not include hidden rot repair, which we always quote in writing before touching it. No-hassle upfront pricing means the number you see is the number you pay for the scope on the page.
See the difference
Before
After
Before
After
Before
AfterWhat Half Moon Bay Homes Specifically Do to This Job
Half Moon Bay sits in a coastal fog belt, and that changes what we find when we open a shower wall. Salt-laden marine air and persistent damp push moisture into places it doesn’t reach inland. In the 1960s and ’70s ranch and tract homes around Ocean Colony and Alsace Lorraine, we regularly find original pan liners that failed years ago, with rot in the framing behind the tile. The fix is routine for us: cut out the bad wood, treat the framing, rebuild with a proper waterproofing barrier. We also specify corrosion-resistant fasteners and fixtures rated for coastal exposure – standard hardware rusts fast out here.
Coastal zoning and flood-zone review add time to any project that changes the footprint or structure. That’s why we confirm permit scope during the estimate, not after demolition. If your shower remodel is part of a larger Bathroom Remodeling in Half Moon Bay project, we coordinate the whole scope under one plan. We cover every corner of Half Moon Bay, from the neighborhoods off Highway 1 to the hills above town. And if an exterior leak near the bath has you worried, our Roof Replacement & Installation in Half Moon Bay team can check the roof above while we’re there.
Serving Half Moon Bay, CA – Our Local Coverage Area
We serve Half Moon Bay and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Walk-In Showers & Shower Remodeling in Half Moon Bay
Most jobs take 2 – 4 weeks of working time, plus 1 – 4 weeks of permit and material lead time before that. A like-for-like shower replacement can be faster. Custom glass adds the most waiting. Call (866) 320-2646 for a schedule based on your specific layout.
A straight replacement in the same footprint often doesn’t require one; moving the drain, changing the structure, or adding electrical typically does. We confirm this during the estimate and pull the permit when it’s needed. Coastal permitting adds scrutiny, so we build that into the timeline.
Yes. Many of our Half Moon Bay shower jobs keep the drain and valve where they are and change everything visible: tile, waterproofing, glass, and fixtures. That keeps the price closer to $4,500 – $8,500 and avoids structural work. We’ll tell you honestly whether your layout supports it.
Walk-in shower installation runs $4,500 – $12,000, and a full shower remodel with surrounding bathroom work lands between $9,000 and $28,000. Size, what’s behind the wall, plumbing moves, and material grade move the number. Call (866) 320-2646 for an exact quote – estimates are free.
Every shower remodel is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That covers workmanship, not the fixtures themselves, which carry manufacturer warranties. We hand you the paperwork at the final walkthrough.
Get a Free Estimate on Your Half Moon Bay Shower
Planning a walk-in shower in your Half Moon Bay home? Call (866) 320-2646 and a live person answers – no voicemail, 24/7. We’ll set up a free on-site estimate, measure the space, talk through layout and materials, and hand you a written line-item quote with a real schedule. If financing helps, 0% for 18 months is available, plus $1,000 off projects over $10,000. One call, straight answers.
Written by the team at Groundwork Construction Co.