Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in San Francisco: What It Costs and How Long It Takes
A chain link fence in San Francisco typically runs $4,130 to $10,620 for a standard residential run, and most jobs are finished in two to four days once the permits clear. The fence itself goes up fast. The part that catches people off guard is everything around it: hillside grading, tight lot lines, and a planning process that moves at its own pace. Call (866) 320-2646 and we’ll walk you through what your specific property needs.
How We Build a Chain Link Fence Here, Start to Finish
Every job has a rhythm. On famously steep lots the rhythm bends, but the sequence holds. Here’s what actually happens, stage by stage, and where you make the calls.
Stage 1: Site walk and line survey (day 1)
We walk the property line with you and confirm where the fence legally sits. On San Francisco row-house lots, the difference between the recorded line and the visible line can be a foot or more, and that matters. You decide the height and the gate placement before anything else moves. Typical visit runs two to three hours.
Stage 2: Utility locate and permit filing (days 1 to 5, variable)
We call in the utility locates before any digging happens; that’s non-negotiable on hillside lots where irrigation, gas, and old drainage lines sit at odd depths. Then we file for the permit. This is where San Francisco schedules its own timeline, and we’ll explain below why that can stretch. You’ll sign off on the final layout drawing during this window.
Stage 3: Demolition and prep (day 2)
If there’s an old fence, it comes down and hauls away. We clear roots, level the trench line, and set stringers. On a steep grade we set the posts in stepped sections so the top rail climbs the hill in clean increments instead of sagging into a wave. You’ll see the post layout before we commit concrete.
Stage 4: Post setting and curing (day 2 into day 3)
Posts go in concrete footings sized for the height and wind exposure, and they cure overnight. You decide here whether you want tension bands on the terminal posts or a different gate hardware set. We don’t rush the cure. A post that sets wet leans within a season.
Stage 5: Fabric, rails, gates, and cleanup (day 3 to 4)
Top rail, tension wire, fabric, and gate hang in a single push, usually one long day. We tension the fabric, hang the gate so it swings true, walk the line with you, and haul off every scrap. Two to four working days total is normal once permits are in hand.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Chain Link Options You’ll Actually Choose Between
Chain link is a simple system, but the spec choices decide how long it lasts near the coast. Here’s the honest trade-off on each.
- Galvanized steel vs. vinyl-coated: Standard galvanized is the budget pick and holds up well inland. Vinyl-coated (usually green or black) costs roughly 15 to 25 percent more and hides the industrial look while adding a corrosion barrier. On the foggy west side, the coating earns its money back.
- Wire gauge: 11.5-gauge is the common residential standard; 9-gauge is heavier and resists bending and cutting far better. If security is the point, spend here first.
- Mesh height: 4-foot reads as a boundary marker, 5-foot is the residential default, 6-foot is the security height. Height drives post spacing and footing size, so decide early.
- Post and rail type: Round galvanized is cheap and proven. Square posts cost more and look cleaner against a Victorian facade.
- Top rail vs. tension wire: A top rail keeps the fabric from sagging over long runs; tension wire is cheaper and fine for short, tight runs.
- Coating and hardware: Stainless fasteners and coated fittings add a small percentage to the total and dramatically outlast standard zinc hardware in salt air.
What a Chain Link Fence Costs in San Francisco, CA
Expect $4,130 to $10,620 for a typical residential chain link fence in San Francisco. That spread is wide because the variables are real, not because we’re being vague.
- Linear footage: The biggest lever. A small backyard run sits near the low end; a full perimeter on a corner lot pushes the high end.
- Grade and terrain: A flat lot needs standard footings. A steep hillside lot needs stepped sections, deeper footings, and more labor hours per foot.
- Access: Tight urban lots where a truck can’t reach the back mean hand-carrying material, which adds labor.
- Height and gauge: Six-foot 9-gauge security spec costs meaningfully more than five-foot 11.5-gauge.
- Gates: Each gate is its own line item with its own hardware, and double gates cost more than single.
- Demo and haul-away: Removing an existing fence and its concrete footings is a real cost.
A written estimate from us is line-item and fixed: the number you see is the number you pay. What it typically doesn’t cover is landscaping repair beyond the fence line, retaining-wall work the hillside may demand, or moving utilities if a line sits directly in the footing path. We flag those before we start, not after.
See the difference
Before
After
Before
After
Before
AfterWhat San Francisco Lots and Weather Do to a Chain Link Fence
Building a fence in San Francisco means working on and beside steep hills in one of the densest, most historic urban cores in the country. Tight lots, hillside foundations, and neighborhood design review shape nearly every project. On the west side, marine fog, persistent damp, and Pacific salt air attack steel and fasteners years ahead of schedule, which is why we spec galvanized, coated, and stainless fittings even on small jobs. The housing stock we work around is a dense mix of 1880s-to-1920s Victorian and Edwardian wood-frame row houses, and their brick foundations and narrow side yards limit where posts can go. We see salt-corroded fittings and heaving fence lines in the fog belt neighborhoods from the Sunset out toward the beaches far more than inland. It’s part of a full Fence Installation in San Francisco scope when you’re fencing more than one line, and homeowners often pair this with Concrete Driveways & Concrete Work in San Francisco to finish a hard-to-reach side yard. Our Fence Installation service covers the wider picture, and our team handles San Francisco and the neighborhoods around it. Backed by the 730-Day Done Right Promise, every install is built to last and backed in writing.
Serving San Francisco, CA – Our Local Coverage Area
We serve San Francisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Chain Link Fence in San Francisco
Most chain link fence installs in San Francisco take two to four working days on site once permits are approved. The permit window is the variable, and hillside lots can stretch the on-site work longer. Call (866) 320-2646 for a timing estimate on your property.
Most residential fence work in San Francisco requires a permit, and height and setback rules apply. Hillside lots and historic districts can add design review. We handle the filing and know what the inspectors look for; call (866) 320-2646 to talk through your specific lot.
Plan on $4,130 to $10,620 for a standard residential chain link fence in San Francisco, driven mostly by linear footage, terrain, height, and gates. Estimates are free and line-item, so call (866) 320-2646 for an exact quote.
Untreated steel corrodes fast in San Francisco’s fog belt, so we spec galvanized or vinyl-coated fabric and stainless hardware on exposed runs. That choice adds a little to the up-front number and years to the lifespan. Call (866) 320-2646 to plan a coast-rated spec.
Every chain link fence install we do is covered by the 730-Day Done Right Promise: if it isn’t done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space. Call (866) 320-2646 to hear what’s covered.
Get a Free Chain Link Fence Estimate in San Francisco
Ready to price a chain link fence in San Francisco? Call (866) 320-2646 and a live person answers, day or night. We’ll ask about your lot, your line, and your goals, then set a free on-site estimate with a written, line-item quote. No pressure, no vague bids. Just a straight number for your San Francisco property.
Written by the team at Groundwork Construction Co.