Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Backsplash, Tile & Flooring in Daly City, CA: What It Costs and How Long It Takes
Backsplash, tile & flooring work in Daly City typically runs $14,000 to $45,000 for a full kitchen tile and floor package, with most single-room jobs landing between $8,000 and $20,000 once you account for the prep work older homes here need. A backsplash alone runs $800 to $2,500; tearing out and replacing flooring across a kitchen and adjoining hall can push past $20,000. Most jobs take 4 to 10 working days. Call (866) 320-2646 for a free on-site estimate.
How a Tile and Flooring Job Actually Runs, Start to Finish
The sequence matters more than most homeowners expect, because cutting corners on demo and prep is where bad tile jobs come from. Here’s the real order of operations on a Daly City job, and what you’re deciding at each step.
Stage 1: Demo and site check (day 1)
We pull the old backsplash, floor covering, and any damaged substrate first. In Daly City’s 1940s-1960s stucco-and-wood-frame homes, that’s where we find the surprises: water damage behind a sink backsplash, paper-faced drywall that’s gone soft, or a floor that’s out of level by half an inch across eight feet. You’ll see exactly what we find before anything new goes down, and we decide together whether it’s a patch or a full substrate replacement.
Stage 2: Repair and leveling (days 1-2)
Soft drywall gets replaced with cement backer board. Out-of-level floors get self-leveling compound or plywood patching before any tile goes near them. If we’re laying large-format tile, this stage takes longer because flatness tolerance is tighter. You decide here whether to stop at repair or address the underlying cause, like a slow leak that’s been eating the cabinet toe kick for years.
Stage 3: Layout and dry-fit (day 2)
We mark the layout before setting a single tile. That means deciding where the tile seams land, whether the backsplash pattern runs vertically or horizontally, and where cuts fall. This is the stage where you commit to pattern, grout line width, and trim pieces. A 20-minute conversation here saves a much bigger one later.
Stage 4: Setting tile and grouting (days 3-6)
Floor tile goes down first, then backsplash, then grout after the thinset cures. Grout is a full 24 hours after setting, minimum. Sealing happens after that, and it’s not optional on natural stone or porous grout – skip it and you’ll be scrubbing grease out of grout lines within a year.
Stage 5: Finish and walkthrough (days 7-10)
Reinstall outlets, re-caulk the backsplash-to-counter seam, clean the grout haze, and walk the job with you. You sign off against the written scope, not a handshake. If something’s off, it gets fixed before we call the job done – that’s the 730-Day Done Right Promise in practice, and it covers the tile work, not just the big-ticket items.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Material choices affect cost and durability as much as looks. Here’s what we actually see homeowners pick between, and the honest trade-off on each.
- Ceramic vs. porcelain tile: Ceramic is cheaper and easier to cut, but it chips on impact and isn’t ideal for floors in high-traffic kitchens. Porcelain costs more per square foot but handles dropped pans and foot traffic far better, and it’s the right call for floors.
- Subway tile vs. large-format backsplash: A classic 3×6 subway tile runs less and looks timeless; large-format slabs (24×48 or bigger) cut down on grout lines but cost noticeably more per square foot and require a very flat wall, which older Daly City kitchens rarely have without prep.
- Grout choices: Cement grout is cheap but stains; epoxy grout costs more upfront and resists grease and moisture far better in a kitchen. Worth the upcharge on a backsplash behind a cooktop.
- Flooring type: Porcelain tile is the workhorse. Luxury vinyl plank is faster to install and warmer underfoot but won’t last as long in a wet kitchen. Real hardwood looks great but hates the damp air this city gets; engineered wood is the middle ground.
- Trim and edge pieces: Schluter-style metal trim vs. bullnose tile vs. a stone pencil liner. Small line item, big visual difference.
What Backsplash, Tile & Flooring Costs in Daly City, CA
Our market-calibrated range for backsplash, tile & flooring in Daly City is $14,000 to $45,000 for a full job, with individual line items running lower. Here’s how the numbers break down.
| Line item | Daly City range |
|---|---|
| Backsplash installation | $800 – $2,500 |
| Kitchen flooring (tile or LVP, per room) | $4,000 – $13,000 |
| Countertop removal and reinstall (if tied in) | $2,000 – $6,500 |
| Cabinet installation (if floors require it) | $4,000 – $13,000 |
| Full kitchen tile and floor package | $14,000 – $45,000 |
What pushes a job toward the high end: square footage and whether the floor extends into a hallway or adjoining room; the condition of the existing substrate (soft drywall and out-of-level floors add repair time); moving plumbing or electrical to accommodate a new layout; material grade, since porcelain and large-format slabs cost meaningfully more than ceramic; and whether a permit is required for any structural or gas-line changes. A written estimate from us lists materials, labor, demo, disposal, and the substrate repair allowance as separate lines, so the number you see is what you pay – no surprise change orders mid-job. What’s typically not included: custom tile from a specialty supplier you source yourself, and any cabinet or countertop replacement beyond what’s needed to access the floor.
See the difference
Before
After
Before
After
Before
AfterWhat Daly City Homes Specifically Do to This Job
Daly City’s dense rows of post-war stucco-over-wood-frame homes sit on steep, fog-soaked slopes, and that housing stock shapes this job in ways you won’t see in the flat suburbs to the south. The 1940s-1960s kitchens we work in across the 94014, 94015, and 94016 ZIP codes were built before cement backer board existed – a lot of them have paper-faced drywall behind the backsplash, which means any water that’s been sneaking behind the tile for 50 years has quietly softened the wall. We find that constantly on the streets off Mission, where the fog and wind-driven rain keep the exterior walls damp and push moisture inward. Outlets and plumbing are usually in the wrong place for a modern backsplash layout, so we’re either relocating them or working the tile around them. And hillside lots mean the crawl spaces stay saturated longer, which is why floor repairs on the lower slopes of Westlake so often turn into rot repair once the old flooring comes up. If your job uncovers that kind of damage, it’s worth knowing up front that a full Kitchen Remodeling in Daly City may make more sense than patching tile over a problem. Homeowners often pair this work with a Vanities, Tile & Fixtures in Daly City refresh in the adjacent bath, or a Tub-to-Shower Conversion in Daly City if they’re updating both rooms at once. We cover the full Daly City area, from the flats near the BART corridor to the steep streets above.
Serving Daly City, CA – Our Local Coverage Area
We serve Daly City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Backsplash, Tile & Flooring in Daly City
A backsplash alone takes 1 to 2 days; adding floor replacement across a kitchen stretches the job to 4 to 10 working days, longer if we find substrate damage. We give you a written schedule before demo starts, and the 730-Day Done Right Promise covers any rework if something fails.
Most backsplash and flooring replacements don’t require a permit. If the job involves moving a gas line, relocating plumbing, or structural changes, permits are required, and we pull them and see the inspection through. We’ll tell you at the estimate stage which category your job falls into.
Yes, in most cases we can work the tile layout around existing outlets and plumbing, but the result looks best when outlets are relocated to sit centered on the backsplash field, which is a small electrical job. We’ll show you both options and the cost difference on the estimate.
Expect $14,000 to $45,000 for the full package, driven by square footage, substrate condition, and material grade. A smaller scope (backsplash plus one floor area) often lands in the $8,000 to $20,000 range. Call (866) 320-2646 for an exact quote – estimates are free.
Every tile and flooring job is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right, for two full years. That’s one of the longest workmanship guarantees in the residential construction space, and it applies to the tile setting, grout, and substrate prep, not just the finished surface.
Get Your Free Backsplash, Tile & Flooring Estimate in Daly City
Call (866) 320-2646 to schedule a free on-site estimate for backsplash, tile & flooring in Daly City. We’ll walk the space with you, measure, look at the substrate, and hand you a written line-item quote with materials, labor, and a realistic schedule – no pressure, no obligation. If you’re weighing this against our broader Kitchen Remodeling service, we’ll map out both on the same visit so you can compare clearly. A live person answers the phone, any hour, any day.
Written by the team at Groundwork Construction Co.