Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in San Francisco: What It Involves and What It Costs
Walk-In Showers & Shower Remodeling in San Francisco usually runs $10,620 to $33,040, and most jobs take two to four weeks from demo to final inspection. A standard walk-in installation alone lands between $5,310 and $14,160, while converting a tub to a curbless shower runs $4,130 to $11,800. The spread comes down to how much plumbing and framing your San Francisco home forces us to touch once the old tile comes off. Call (866) 320-2646 to schedule a free on-site estimate.
How a Walk-In Shower Gets Built Here, Stage by Stage
Every job follows the same real sequence. Here’s what each stage actually looks like and when you’ll need to make a decision.
Stage 1: Site review and layout (day 1)
We measure the existing stall, check the drain location, and look at what’s behind the tile. In San Francisco’s older row houses, “demo by others” is where surprises hide, so we open a small inspection area before promising anything. You decide the footprint: curb or curbless, linear drain or center, and whether the entry stays where it is or moves. That choice drives everything downstream.
Stage 2: Permit pull and demo (days 2 – 4)
Most shower remodels that move plumbing, change the drain configuration, or touch the waterproofing membrane require a building permit, and San Francisco’s Department of Building Inspection moves at its own pace. We file early. Demo takes one to three days: tile off, backer board out, framing exposed, drain cut free. If we find rot in the subfloor or water damage behind the old valve, we document it and hand you a line-item add before proceeding.
Stage 3: Rough-in and waterproofing (days 5 – 10)
This is the stage nobody sees and the one that decides whether the shower lasts. We set the new valve, relocate the drain if the layout changed, then build a sloped, sealed shower pan. We use a bonded membrane system and flood-test it before a single tile goes down. The inspection happens here, and it’s non-negotiable for a permitted job.
Stage 4: Tile, glass, and fixtures (days 10 – 18)
Tile goes on walls and floor, then we template and order the glass. Frameless panels take a week or more to fabricate, so we order them early to keep the schedule tight. You’ve already picked the tile and finish by now; this is the point of no return on layout.
Stage 5: Final inspection and walkthrough (days 18 – 24)
We pass inspection, install the fixed glass and door, seal the perimeter, and walk you through the drain pitch and maintenance. You sign off, and the work is covered by the 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Weigh Before We Start
A walk-in shower is a short list of decisions with long consequences. Here’s the honest trade-off on each.
- Curbless vs. curbed. A curbless entry is safer and looks cleaner, but it needs floor framing that can recess the pan, and in a second-floor San Francisco bathroom that can mean structural work. Expect the curbless version to sit at the top of the range. A low curb costs less and avoids the framing question.
- Tile: porcelain vs. natural stone. Porcelain holds up against the marine fog and damp that come with living near the Pacific, and it’s easier to keep clean. Marble and limestone look richer but need sealing and stain more in a shower. Porcelain is the practical pick for most San Francisco bathrooms.
- Glass: frameless vs. framed. Frameless glass opens the space up, which matters in a narrow row-house bath. It also costs more and takes longer to fabricate. Framed glass saves money but adds visible metal that traps moisture.
- Fixtures and finishes. Kohler and similar lines give you a reliable valve and trim set. Budget fixtures are fine until the cartridge fails; then you’re paying for the same wall opening twice.
- Drain style. A linear drain allows larger-format tile and a cleaner slope. A center drain is simpler and cheaper to install.
- Ventilation. A properly sized exhaust fan is the cheapest insurance against mold in a damp city bathroom. We size it to the room, not to a spec sheet.
What Walk-In Showers & Shower Remodeling Costs in San Francisco, CA
Plan on $10,620 to $33,040 for a full walk-in shower remodel in San Francisco. Here’s how the numbers break down:
- Walk-in shower installation: $5,310 – $14,160
- Shower replacement (like-for-like): $3,540 – $10,030
- Tub-to-shower conversion: $4,130 – $11,800
- Full walk-in shower remodel with new tile, glass, and fixtures: $10,620 – $33,040
Five things push a job to the high end. Size first: a 36-inch stall and a five-foot walk-in are different projects. Existing condition second: rot, failed waterproofing, or a subfloor that needs repair adds real money. Third, relocating the drain, valve, or a wall to gain clearance is where plumbing and framing costs jump. Fourth, material grade: porcelain and budget glass sit low; marble and frameless glass sit high. Fifth, permit scope: a simple replacement permit and a job that moves plumbing are not priced the same.
Every written estimate we hand you is a line-item breakdown: demo, framing, waterproofing, tile, glass, fixtures, and permits. What it won’t include unless we flag it is unforeseen framing damage or a code upgrade the inspector requires. We won’t surprise you mid-job. Call (866) 320-2646 for an exact quote.
See the difference
Before
After
Before
After
Before
AfterWhat San Francisco Homes Specifically Do to This Job
San Francisco’s housing stock changes the work more than any other factor. The Victorian and Edwardian wood-frame row houses that fill neighborhoods like the Mission, Noe Valley, and the Inner Richmond were built between the 1880s and 1920s on brick foundations, and plenty of them still have the original plumbing behind the tile. Open a wall in a Noe Valley bath and you may find galvanized supply lines that should have been replaced decades ago. On the west side, the fog belt and salt air from the Pacific corrode standard fasteners and shower hardware faster than anywhere else in the Bay, so we spec stainless and galvanized components even on small jobs. Hillside lots add their own wrinkle: a second-floor shower that needs a recessed pan may bump into structural framing that was never designed for it. And because so much of this city’s older multifamily stock still needs soft-story seismic work, we coordinate shower remodels around the structural upgrades a building already has scheduled. Permits run through San Francisco’s Department of Building Inspection, and inspections here are thorough. We pull the permits and see them through. This is part of the broader bathroom remodeling we handle across San Francisco, and if you’re planning a larger project, homeowners often pair this with Roof Replacement & Installation in San Francisco while the scaffolding is up anyway.
Serving San Francisco, CA – Our Local Coverage Area
We serve San Francisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Walk-In Showers & Shower Remodeling in San Francisco
Most walk-in shower remodels in San Francisco take two to four weeks, with the permit and inspection calendar being the biggest variable. Demo and rough-in move quickly; glass fabrication and inspection scheduling add the days. Call (866) 320-2646 and we’ll give you a realistic timeline for your specific bathroom.
Yes, if the work moves plumbing, changes the drain, or replaces the waterproofing membrane, which most walk-in shower remodels do. A straight tile-and-fixture replacement may not require one. We pull the permit and handle the inspections so you’re not chasing paperwork. Call (866) 320-2646 to confirm what your job needs.
Often yes. A like-for-like replacement that keeps the drain and valve in place is the least invasive path and lands near the low end of the range. A curbless conversion that recesses the pan, or a layout change that relocates the drain, is where structure and plumbing costs appear. Call (866) 320-2646 and we’ll tell you which applies to your bathroom.
A full walk-in shower remodel in San Francisco runs $10,620 to $33,040, and a straight installation runs $5,310 to $14,160. Tile grade, glass type, and whether plumbing moves are the biggest drivers. Call (866) 320-2646 for a free, line-item estimate.
Every walk-in shower we build is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That covers workmanship on the pan, waterproofing, and tile. Manufacturer warranties on valves and glass apply separately. Call (866) 320-2646 with any questions about coverage.
Get a Free Walk-In Shower Estimate in San Francisco
Planning a walk-in shower? Call (866) 320-2646 and a live person answers, day or night, to schedule a free on-site estimate. We’ll measure the space, look at what’s behind the tile, and hand you a written line-item quote with no hidden numbers. Upfront pricing, permits pulled, workmanship guaranteed by the 730-Day Done Right Promise. Financing at 0% for 18 months is available, plus $1,000 off projects over $10,000.
Written by the team at Groundwork Construction Co.