Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tub-to-Shower Conversion in San Anselmo, CA: What It Involves and What It Costs
A tub-to-shower conversion in San Anselmo, CA typically runs $3,500 – $10,000 and takes about 5 to 10 working days from demo to a finished, inspected shower. It means pulling the tub, reworking the drain and valve to shower height, waterproofing the walls and floor, and setting a new pan and tile or a prefab surround. Every conversion we quote here is handled by our crew and backed in writing by our 730-Day Done Right Promise. Call (866) 320-2646 for a free on-site estimate.
How a Tub-to-Shower Conversion Actually Gets Built, Stage by Stage
The order of operations matters. Skip a step and the shower fails, usually two years in, behind a wall you can’t see.
Stage 1: Site check and decisions (day 1). We pull the old enclosure and inspect what’s under it: drain location, valve type, the condition of the subfloor around the drain, and whether there’s water damage behind the surround. You decide the footprint (standard 30 by 60, or a wider custom pan), the finish, and the door or curtain style. This is when the biggest choices get locked.
Stage 2: Demo and rough-in (days 2 – 3). The tub comes out. We set the new drain and trap, relocate or replace the valve, and frame any wall that needs reworking. Where the plumbing moves more than a small amount, this is a longer day. If there’s rot in the subfloor, we show you photos before we cut and quote the repair with upfront pricing so the number you see is the number you pay.
Stage 3: Waterproofing and pre-slope (days 3 – 5). A sloped bed under the pan, then a bonded waterproofing membrane or a closed-cell backer system on the walls and floor. Corners and seams get treated and taped. This is the step most fast conversions get wrong. It’s also the one nobody sees when the job is done, which is exactly why we walk you through it.
Stage 4: Pan, tile, and fixtures (days 5 – 8). The shower pan or tile base goes in, then wall tile or a solid-surface surround, then the valve trim, showerhead, and niche or bench if you chose one. Grout cures 24 hours before we seal.
Stage 5: Door, inspection, cleanup (days 8 – 10). Glass door or curtain rod, silicone at the perimeter, walkthrough. If a permit was pulled, the inspector signs off before we hand you the room back. We leave the trash hauled.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make: Finish, Layout, and Drain System
Most of the price swing in a tub-to-shower conversion comes from these decisions, not the labor hours. Here’s what you’re choosing between, with the honest trade-off on each.
- Tile walls vs. solid-surface surround. Porcelain tile gives you the look and any pattern you want, runs higher on material and labor, and resealing grout every few years is on you. A solid-surface panel is faster to install, wipes clean in seconds, and hides the seams well, but limits your pattern to what the manufacturer offers.
- Prefab pan vs. tiled mud bed. Prefab pans are less expensive and waterproof out of the box, but a standard size may not fit an old alcove exactly. A tiled mud bed with a linear drain fits any footprint and looks seamless, and adds cost and a day of curing.
- Frameless glass vs. framed door vs. curtain. Frameless glass is the premium finish, needs a solid backing behind the hinges, and adds a few hundred dollars. A framed slider is a solid middle ground. A rod and curtain is the least expensive option and the easiest to replace later.
- Niche and bench. Both look built-in and both add construction time, but a recessed niche saves you from aftermarket shelving and a corner bench makes a shower usable for aging-in-place. You’ll want blocking in place before wall board goes up.
- Door and window hardware. If your shower wall faces glass, we can spec a tempered, moisture-rated unit. We work with brands like Mr-Glass and ViewLux when the surround includes a fixed glass panel tied into the wall tile.
Where the work expands into the rest of the room, this can be part of a full Bathroom Remodeling in San Anselmo rather than a standalone conversion.
What Tub-to-Shower Conversion Costs in San Anselmo, CA
The range is $3,500 – $10,000 for a tub-to-shower conversion in San Anselmo. Where a job lands depends on five variables:
- Footprint and layout. A standard 30 by 60 alcove swap is at the low end. Widening the shower, adding a bench, or removing a wall to gain space pushes it higher.
- Existing condition. Hidden rot around the drain, failed mastic, or a compromised subfloor adds carpentry and waterproofing scope. Photographic proof and a written change order keep this transparent.
- Moving plumbing, electrical, or structure. Relocating the drain across the floor or shifting a valve line is real work. Moving a light or adding a fan triggers an electrical permit.
- Material grade. Budget ceramic tile versus large-format porcelain versus a linear drain and a frameless door will each land in a different spot on the range.
- Permit scope. A simple fixture swap may not require a permit. Moving plumbing does. We pull it and stand for the inspection.
Every written estimate we deliver itemizes labor, tile or surround material, the pan system, fixtures, glass, and permits. It excludes anything still undecided: the door style if you haven’t picked one, or a structural repair hidden under the floor, which we quote only after opening the area. No surprises when the job starts.
See the difference
Before
After
Before
After
Before
AfterWhat San Anselmo Homes Do to This Job
San Anselmo sits in the San Anselmo Creek watershed at the foot of Mount Tamalpais, and the flats east of Sir Francis Drake Boulevard are built on a flood-prone alluvial flat. For a bathroom conversion, that geography shows up in two specific ways. First, homes here often sit lower and hold more moisture at the slab and subfloor than a hillside house would. Second, any renovation that touches plumbing or structure in the floodplain can trigger county floodplain review, which neighboring towns like Fairfax or Ross don’t have as a routine step. The downtown corridor has flooded repeatedly, and we plan the conversion schedule around wet-season work wherever a permit is involved.
The housing stock here leans toward early-1900s to 1950s Craftsman and bungalow homes, with mid-century and later custom houses climbing toward Sleepy Hollow and the Ross border. In the older flats homes, that means we regularly find knob-and-tube-era framing, non-standard alcove dimensions, and cast iron drains that need a careful eye before we set the new pan. On the hillside, the pier-and-post foundations mean the floor may not be as level as it looks, and a shower pan needs a pre-slope we build ourselves rather than rely on what’s underneath. We cover these conversions across San Anselmo, from the flats to the hills above Sleepy Hollow.
Storm resilience is part of the answer too. A leaking shower mixing valve or a failed perimeter seal is exactly the kind of water intrusion that shows up when Marin’s atmospheric-river storms hit. The fix is correctly installed waterproofing and a written warranty, and homeowners sometimes pair this work with Metal Roofing in San Anselmo or Tile Roofing in San Anselmo when the roof is due for attention at the same time.
Serving San Anselmo, CA – Our Local Coverage Area
We serve San Anselmo and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Tub-to-Shower Conversion in San Anselmo
A typical conversion takes 5 to 10 working days from demo to finish, with larger custom showers and tile walls on the longer end. Weather and permit inspections can add a day or two in San Anselmo. Most jobs are completed in a single, continuous visit rather than broken into repeated trips. Call (866) 320-2646 for an exact timeline after we’ve seen the space – the estimate is free.
Yes, if the plumbing or electrical is moved. A simple fixture swap with no changes to the trap or valve may be exempt, but moving a drain or adding a fan requires a permit and inspection. We pull the permit and stand for the inspection on your behalf. Call (866) 320-2646 to ask about your specific job.
In most cases, yes. A standard 30 by 60 alcove can be converted without touching the structure if the drain and valve line up, and this is where a tub-to-shower conversion stays near the $3,500 – $4,500 end of the range. Once you want a wider footprint or a relocated drain, the number moves. Call (866) 320-2646 for an honest read on your layout.
The range is $3,500 – $10,000. Most standard conversions land between $4,500 and $7,500, with the high end reserved for custom footprints, tiled mud beds, frameless glass, or structural and subfloor repair. Call (866) 320-2646 for a free, written, line-item estimate with 0% financing for 18 months and $1,000 off projects over $10,000.
Every conversion is covered by our 730-Day Done Right Promise, which means if the waterproofing, tile, or fixture installation fails, we make it right within that period. That’s the written guarantee, not a handshake. Call (866) 320-2646 to schedule your free estimate.
Get a Free Estimate for Your San Anselmo Conversion
If you’re ready to trade the tub for a shower you’ll actually use, call (866) 320-2646 to schedule a free on-site estimate in San Anselmo. A live person answers around the clock, no voicemail. We’ll measure the space, walk through your finish and layout options, check for the plumbing and subfloor surprises the older homes here sometimes hide, and hand you a written, itemized quote with upfront pricing. No pressure to book on the spot.
Written by the team at Groundwork Construction Co.